Q:Ride ebike on the flat road,no problem,but when I climb the hill,it will stop and wait for a moment,it still can re-start and have the same problem at once.
A:The temp inside the controller is too high and in order to protect this controller,should wait for a moment until the temp is lower than protective temp.
Solve:Use more MOS-FET brushless controller.
Now our 48V brushless motor controller has 15-MOSFET.More MOSFET afford temp and the temp rise very slow.It can solve this problem.
In market,always use 9-MOSFET to drive 48V 1000W hub motor.This kind of brushless controller is easy to be broken because of high temp will break MOSFET.
36V 750W / 48V 1000W 14″ brushless gearless hub motor is make up of aluminium hub,aluminium cover,magnet,rotor,winding,axis etc.Mounted 14×2 1/4~2 1/2″tyre,load approximate 300lb.Motor speed,we can customize according as your actually need.
It’s used for e-bike,e-scooter.
Comments are closed.