Leafmotor

48V 1000W-1500W-2000W, 36V 250W-500W-750W, 24V 250W Motor controllers with LCD-003 from Leaf Bike are used to drive 8-9-10-12-13-14-16-17-18-20-22-24-26-27.5-700C-28-29er inch hub motor bike wheels.

How to set max speed?
If you feel 20 inch or 24 inch,26 inch, 700c, 28 inch, 29 inch hub motor kit is too fast,please set it to be low speed.
* Press “sw/middle button” from LCD more than 2 seconds,then LCD will display.
* Press “up & down button” together more than 2 sconds until 72 is flashing ( 72 is kmh, if you hope works 20mph / 32kmh, press “down” to be 32)
* Press “sw/middle” button one time to save,then 24 is flashing.. (24 is hub motor wheel size. Don’t set)
* Press “sw/middle” button one time to save,then kmh or mph is flashing..
* Press “sw/middle” button one time to save,then press “sw/middle” button more than 2 seconds until be back.

Turn throttle,motor will work max speed as your setting.

—————
There is a “ 5 or 4 or 3 or 2 or 1 or 0” on the Left side of LCD.
* Be “0” – throttle & pedal assist NOT work.
* Be “1” – throttle works (If install pedal assist, pedal about 3 circels,then can drive motor to work)
* Be “2” – throttle works (If install pedal assist, pedal about 2.5 circels,then can drive motor to work)
* Be “3” – throttle works (If install pedal assist, pedal about 2 circels,then can drive motor to work)
* Be “4” – throttle works (If install pedal assist, pedal about 1.5 circels,then can drive motor to work)
* Be “5” – throttle works (If install pedal assist, pedal about 1 circels,then can drive motor to work)

If NOT install that pedal assist,ONLY use throttle to drive motor. But Should be 1 or 2 or 3 or 4 or 5.(Be 0,turn off throttle)

——————————–
How to use three button switch?
1.We cut off that blue wire.It’s for reverse. If reconnect this blue wire.
This yellow button be left / middle,29 inch bike motor kit works forward. Be right side,hub motor works bacwkard / reverse…

2.Green button is used to control cruise, while electric bike motor is running,also over some speed,example: over 1/3 max speed,at this time,press green button one time,then loose throttle,LCD display “C”,motor will works the same speed. Re-press this green button one time or press brake lever or turn throttle to max, electric bike motor will stop.

3.Red button be up,regen on. Be down,regen off. This regen is not strong.Only while braking with a little regen.