Our bike conversion kit includes everything you need motor, with components of proven reliability and energy efficiency. Motor bike conversion kits are supplied without battery and accessories (charger, bracket, connectors, key contact or fuse). These must be purchased separately in our sections. The integration of these components requires some training in electronics. The kit includes XF 350 watt motor. radiated. With technology “brushless” brushless and maintenance. It offers excellent performance (greater than 80%), in a very tight size and weight (3.7 kg. Rim and 2.85 without). You can choose which tire is mounted engine (size, type of single or double llantam, front or back). See the best option for you in the top-down Compatible with disc brakes. The engine is designed to fit into a standard 100-mm fork in front configuration. It has a waterproof plug to 11 cm. very convenient for installation and maintenance of the wheel, for example, in case of puncture repair. Please check the dimensions of the engine with this document (click). Also available for rear wheel option. Computer-controlled 14 amp. It is the system control center. The driver picks up the signal from the pedal sensor (PAS) or the accelerator and sends the necessary power to the motor. Includes PPS system, progressive power delivery, which makes controlling the bike and avoid skidding. 500 watts maximum power. Controller Dimensions: 8 cm. X 6.5 cm. X 3 cm. Weight: 240 gr. PAS pedal sensor Mounts to bottom bracket. Detects the user’s pedaling and sends a signal to the controller for the active engine. Its installation requires removing a pedal and crank shaft of the bowl of it. our PAS systems offer up to 4 levels of assistance, depending on the user’s lack of pedaling. The starting system is scheduled to be smooth to avoid skidding. You may need a crank extractor tool and an exhaust bracket. Accelerator The accelerator allows you to use the bike as a motorcycle, this is not necessary to pedal. It’s kind of “trigger”, ensuring compatibility with change and handlebar grips. It incorporates a three-battery indicator LED. It has cruise control. Select a speed and let it set for continued assistance. Note that the use of accelerator is not entitled to public roads according to CE standards. – Installation is optional. Cut brake levers v-brake signal They are a recommended safety feature if you install the accelerator. They cut the signal from the engine as soon as you press the brakes, preventing, for example, the user can continue accelerating in an emergency. Washers and plugs of the engine. Set of washers, protective caps of the engine for its new motorized wheel. Manual assembly step A visual manual with wiring diagram and mounting kit step by step. In addition, the team CicloTEK is available to help you at all times.
Comments are closed.